Abilify Maintena suspension for injection 400mg (300mg not marketed)

*
Pharmacy Only: Prescription
  • Company:

    Lundbeck (Ireland) Limited
  • Status:

    No Recent Update
  • Legal Category:

    Product subject to medical prescription which may not be renewed (A)
  • Active Ingredient(s):

    *Additional information is available within the SPC or upon request to the company

Updated on 29 March 2024

File name

IE PIL Abilify Maintena 300 mg & 400 mg Vial.pdf

Reasons for updating

  • Change to Section 1 - what the product is
  • Change to section 2 - what you need to know - warnings and precautions
  • Change to section 2 - interactions with other medicines, food or drink
  • Change to section 2 - pregnancy, breast feeding and fertility
  • Change to section 3 - dose and frequency
  • Change to section 4 - possible side effects
  • Change to section 5 - how to store or dispose
  • Change to section 6 - what the product contains

Updated on 29 March 2024

File name

IE SmPC Abilify Maintena 300 mg & 400 mg vial & PFS.pdf

Reasons for updating

  • Change to section 4.2 - Posology and method of administration
  • Change to section 4.4 - Special warnings and precautions for use
  • Change to section 4.5 - Interaction with other medicinal products and other forms of interaction
  • Change to section 4.6 - Pregnancy and lactation
  • Change to section 4.8 - Undesirable effects
  • Change to section 4.9 - Overdose
  • Change to section 5.1 - Pharmacodynamic properties
  • Change to section 5.2 - Pharmacokinetic properties
  • Change to section 5.3 - Preclinical safety data
  • Change to section 6.1 - List of excipients
  • Change to section 6.3 - Shelf life
  • Change to section 6.6 - Special precautions for disposal and other handling

Legal category:Product subject to medical prescription which may not be renewed (A)

Updated on 13 June 2023

File name

IE Abilify Maintena 300 & 400 mg powder and solvent for prolonged-release suspension for Injection SPC - REG_00078619.pdf

Reasons for updating

  • Document format updated

Legal category:Product subject to medical prescription which may not be renewed (A)

EDM Updated on 20 October 2021

File name

IE IFU inj vial.pdf

Reasons for updating

  • Replace File

Updated on 20 October 2021

File name

IE Abilify Maintena 300 & 400 mg powder and solvent for prolonged-release suspension for Injection SPC - REG_00078619.pdf

Reasons for updating

  • Change to section 2 - Qualitative and quantitative composition
  • Change to section 4.2 - Posology and method of administration
  • Change to section 4.4 - Special warnings and precautions for use
  • Change to section 4.8 - Undesirable effects
  • Change to section 4.9 - Overdose
  • Change to section 5.1 - Pharmacodynamic properties
  • Change to section 5.2 - Pharmacokinetic properties
  • Change to section 5.3 - Preclinical safety data
  • Change to section 6.3 - Shelf life
  • Change to section 6.4 - Special precautions for storage
  • Change to section 6.5 - Nature and contents of container
  • Change to section 6.6 - Special precautions for disposal and other handling

Legal category:Product subject to medical prescription which may not be renewed (A)

Updated on 20 October 2021

File name

IE Abilify Maintena 300 & 400 mg powder and solvent for prolonged-release suspension for injection PIL - REG_00078620.pdf

Reasons for updating

  • Change to section 2 - excipient warnings
  • Change to section 4 - possible side effects
  • Change to section 6 - what the product contains
  • Change to section 6 - date of revision

EDM Updated on 16 April 2021

File name

usermanual.7965.pdf

Reasons for updating

  • Add New Doc

Updated on 04 November 2020

File name

IE Abilify Maintena 300 & 400 mg powder and solvent for prolonged-release suspension for Injection SPC - REG_00078619.pdf

Reasons for updating

  • Change to section 4.2 - Posology and method of administration

Legal category:Product subject to medical prescription which may not be renewed (A)

Updated on 04 November 2020

File name

IE Abilify Maintena 300 & 400 mg powder and solvent for prolonged-release suspension for injection PIL - REG_00078620.pdf

Reasons for updating

  • Change to section 3 - how to take/use

Updated on 20 October 2020

File name

IE Abilify Maintena 300 & 400 mg powder and solvent for prolonged-release suspension for Injection SPC.pdf

Reasons for updating

  • Change to section 4.8 - Undesirable effects

Legal category:Product subject to medical prescription which may not be renewed (A)

Updated on 20 October 2020

File name

IE Abilify Maintena 300 & 400 mg powder and solvent for prolonged-release suspension for injection PIL.pdf

Reasons for updating

  • Change to section 4 - possible side effects

Updated on 15 May 2020

File name

IE Abilify Maintena 300 400 mg powder and solvent for prolonged-release suspension for Injection SPC - clean.pdf

Reasons for updating

  • Change to section 4.8 - Undesirable effects

Legal category:Product subject to medical prescription which may not be renewed (A)

Updated on 15 May 2020

File name

IEPLAbilifyMaintena_VialApr2019clean1659.066_final.pdf

Reasons for updating

  • Change to section 4 - possible side effects

Updated on 12 August 2019

File name

IEPLAbilifyMaintena_VialApr2019clean1659.066_final.pdf

Reasons for updating

  • Change to information for healthcare professionals

Updated on 09 August 2019

File name

IE SmPC Abilify Maintena Apr 2019 clean - for ie.pdf

Reasons for updating

  • Other

Legal category:Product subject to medical prescription which may not be renewed (A)

Updated on 20 May 2019

File name

IE PL Abilify Maintena_ Apr 2019 clean.pdf

Reasons for updating

  • Previous version of PIL reinstated

Updated on 07 May 2019

File name

IE PL Abilify Maintena_ Apr 2019 clean.pdf

Reasons for updating

  • Change to section 4 - possible side effects

Updated on 21 November 2018

File name

IE PL Abilify Maintena injection 10 2018 clean.pdf

Reasons for updating

  • Change to section 6 - manufacturer
  • Change to MA holder contact details

Updated on 06 November 2018

File name

PIL IE Clean 400 and 300 suspension for injection.pdf

Reasons for updating

  • Change to section 6 - date of revision
  • Change to MA holder contact details

Updated on 27 September 2018

File name

Package leaflet Injection IE.pdf

Reasons for updating

  • Change to section 4 - possible side effects

Updated on 14 September 2018

File name

PIL IE Clean 400 and 300 suspension for injection.pdf

Reasons for updating

  • Change to section 2 - what you need to know - contraindications
  • Change to section 2 - what you need to know - warnings and precautions
  • Change to section 2 - driving and using machines
  • Change to section 3 - how to take/use
  • Change to section 4 - possible side effects
  • Change to section 5 - how to store or dispose
  • Change to section 6 - date of revision

Updated on 04 May 2018

File name

PILsuspensionforinjection_PCR929312 amended.pdf

Reasons for updating

  • New PIL for new product

Updated on 03 April 2018

Reasons for updating

  • New SPC for new product

Legal category:Product subject to medical prescription which may not be renewed (A)

Updated on 03 April 2018

Reasons for updating

  • Change to section 4.4 - Special warnings and precautions for use
  • Change to section 4.8 - Undesirable effects
  • Change to section 10 - Date of revision of the text

Legal category:Product subject to medical prescription which may not be renewed (A)

Free text change information supplied by the pharmaceutical company

Amendments and updates to Section 4,4 and 4.8 with regards to impulse control disorders.

Updated on 18 July 2016

Reasons for updating

  • New SPC for new product

Legal category:Product subject to medical prescription which may not be renewed (A)

Updated on 18 July 2016

Reasons for updating

  • Change to section 4.8 - Undesirable effects
  • Change to section 10 - Date of revision of the text

Legal category:Product subject to medical prescription which may not be renewed (A)

Free text change information supplied by the pharmaceutical company

Addition of 'hiccup' in Section 4.8 as 'uncommon'

Updated on 20 July 2015

Reasons for updating

  • Change to section 4.8 - Undesirable effects
  • Change to section 5.1 - Pharmacodynamic properties
  • Change to section 10 - Date of revision of the text

Legal category:Product subject to medical prescription which may not be renewed (A)

Free text change information supplied by the pharmaceutical company

In section 4.8, hyperprolactinaemia, diplopia and aggression have been added.
Text regarding prolactin blood levels have been moved from seciton 4.8 to 5.1
Date of revision of the text has been updated.

Updated on 14 May 2015

Reasons for updating

  • Change to section 4.2 - Posology and method of administration
  • Change to section 4.8 - Undesirable effects
  • Change to section 6.5 - Nature and contents of container
  • Change to section 6.6 - Special precautions for disposal and other handling
  • Change to section 10 - Date of revision of the text

Legal category:Product subject to medical prescription which may not be renewed (A)

Free text change information supplied by the pharmaceutical company

Section 4.2 Method of administration Abilify Maintena is only intended for intramuscular use and should not be administered intravenously or subcutaneously. It should only be administered by a healthcare professional. The suspension should be injected immediately after reconstitution but can be stored below 25 °C for up to 4 hours in the vial. The suspension should be injected slowly as a single injection (doses must not be divided) into the gluteal or deltoid muscle. Care should be taken to avoid inadvertent injection into a blood vessel. Sites of injections should be rotated between the two gluteal or deltoid muscles. The recommended needle for gluteal administration is a 38 mm (1.5 inch), 22 gauge hypodermic safety needle. For obese patients (Body mass index > 28 kg/m2), a 50 mm (2 inch), 21 gauge hypodermic safety needle should be used. The recommended needle for deltoid administration is a 25 mm (1 inch), 23 gauge hypodermic safety needle. For obese patients, a 38 mm (1.5 inch), 22 gauge hypodermic safety needle should be used (see section 6.6). Section 4.8 Injection site reactions During the double blind, .../..... In an open label study comparing bioavailability of Abilify Maintena administered in the deltoid or gluteal muscle, injection site related reactions were slightly more frequent in the deltoid muscle. The majority were mild and improved on subsequent injections. When compared to studies where Abilify Maintena was injected in the gluteal muscle, repeated occurrence of injection site pain is more frequent in the deltoid muscle. Section 5.2 Absorption Aripiprazole absorption …/…. The average absorption half-life …/…. Following a single dose administration of Abilify Maintena in the deltoid and gluteal muscle, the extent of absorption (AUC) was similar for both injection sites, but the rate of absorption (Cmax) was higher following administration to the deltoid muscle. Following multiple intramuscular doses, the plasma concentrations of aripiprazole gradually rise to a maximum plasma concentration at a median Tmax of 7 days for the gluteal muscle and 3 days for the deltoid muscle. Steady state concentrations for the typical subject were attained by the fourth dose for both sites of administration. 6.5 Nature and contents of container Single pack Each single pack containing one vial of powder, 2 ml vial of solvent, one 3 ml luer lock syringe with pre-attached 38 mm (1.5 inch) 21 gauge, hypodermic safety needle with needle protection device, one 3 ml disposable syringe with luer lock tip, one vial adapter and three hypodermic safety needles: one 25 mm (1 inch) 23 gauge, one 38 mm (1.5 inch) 22 gauge and one 50 mm (2 inch) 21 gauge. 6.6 Special precautions for disposal and other handling. Any unused medicinal product or waste material should be disposed of in accordance with local requirements. Step 1: Preparation prior to reconstitution of the powder. (a) Lay out and confirm that components listed below are provided: - Abilify Maintena package leaflet and instructions for healthcare professionals - Vial of powder - 2 ml vial of solvent Important: the solvent vial contains an overfill. - One 3 ml luer lock syringe with pre-attached 38 mm (1.5 inch) 21 gauge hypodermic safety needle with needle protection device - One 3 ml disposable syringe with luer lock tip - One vial adapter - One 25 mm (1 inch) 23 gauge hypodermic safety needle with needle protection device - One 38 mm (1.5 inch) 22 gauge hypodermic safety needle with needle protection device - One 50 mm (2 inch) 21 gauge hypodermic safety needle with needle protection device - Syringe and needle instructions Step 2: Reconstitution of the powder (a) Remove the solvent and powder vial caps and wipe the tops with a sterile alcohol swab. (b) Using the syringe with pre-attached needle, withdraw the pre-determined solvent volume from the vial of the solvent into the syringe. 400 mg vial: Add 1.9 ml solvent to reconstitute the powder A small amount of residual solvent will remain in the vial following withdrawal. Any excess should be discarded. (c) Slowly inject the solvent into the vial containing the powder. (d) Withdraw air to equalise the pressure in the vial by pulling back slightly on the plunger. (e) Subsequently, remove the needle from the vial. Engage the needle safety device by using the one-handed technique . Gently press the sheath against a flat surface until the needle is firmly engaged in the needle protection sheath. Visually confirm that the needle is fully engaged into the needle protection sheath, and discard. Cover Discard (f) Shake the vial vigorously for 30 seconds until the suspension appears uniform. (g) Visually inspect the reconstituted suspension for particulate matter and discolouration prior to administration. The reconstituted medicine is a white to off-white, fluid suspension. Do not use if reconstituted suspension contains particulate matter or any discolouration. (h) If the injection is not performed immediately after reconstitution, keep the vial below 25 °C for up to 4 hours and shake it vigorously for at least 60 seconds to re-suspend prior to injection. (i) Do not store the reconstituted suspension in the syringe. Step 3: Preparation prior to injection (a) Remove the cover, but not the adapter from the package. (b) Using the vial adapter package to handle the vial adapter, attach the pre-packaged luer lock syringe to the vial adapter . (c) Use the luer lock syringe to remove the vial adapter from the package and discard the vial adapter package . Do not touch the spike tip of the adapter at any time. (d) Determine the recommended volume for injection. Abilify Maintena 400 mg Vial Dose Volume to Inject 400 mg 2.0 ml 300 mg 1.5 ml 200 mg 1.0 ml 160 mg 0.8 ml (e) Wipe the top of the vial of the reconstituted suspension with a sterile alcohol swab. (f) Place and hold the vial of the reconstituted suspension on a hard surface. Attach the adapter-syringe assembly to the vial by holding the outside of the adapter and pushing the adapter’s spike firmly through the rubber stopper, until the adapter snaps in place. (g) Slowly withdraw the recommended volume from the vial into the luer lock syringe to allow for injection. A small amount of excess product will remain in the vial. Step 4: Injection procedure (a) Detach the luer lock syringe containing the recommended volume of reconstituted Abilify Maintena suspension from the vial. (b) Select one of the following hypodermic safety needles depending on the injection site and patient’s weight and attach the needle to the luer lock syringe containing the suspension for injection. Ensure the needle is firmly seated on the needle protection device with a push and clockwise twist and then pull the needle cap straight away from the needle. Body type Injection site Needle size Non-obese Deltoid Gluteal 25 mm (1 inch) 23 gauge 38 mm (1.5 inch) 22 gauge Obese Deltoid Gluteal 38 mm (1.5 inch) 22 gauge 50 mm (2 inch) 21 gauge (c) Slowly inject the recommended volume as a single intramuscular injection into the gluteal or deltoid muscle. Do not massage the injection site. Care must be taken to avoid inadvertent injection into the blood vessel. Do not inject into an area with signs of inflammation, skin damage, lumps and/or bruises. For deep intramuscular gluteal or deltoid injection only. deltoid gluteal Remember to rotate sites of injections between the two gluteal or deltoid muscles. Look for signs or symptoms of inadvertent intravenous administration. Step 5: Procedures after injection (a) Engage the needle safety device as described in Step 2 e). Dispose of the vials, adapter, needles, and syringe appropriately after injection. The powder and solvent vials are for single-use only. Cover Discard 10. DATE OF REVISION OF THE TEXT 22/01/2015

Updated on 22 December 2014

Reasons for updating

  • Change to improve clarity and readability

Legal category:Product subject to medical prescription which may not be renewed (A)

Free text change information supplied by the pharmaceutical company

Correct of typos
Deletion of multipack from section 6.5

Updated on 30 September 2014

Reasons for updating

  • New SPC for new product

Legal category:Product subject to medical prescription which may not be renewed (A)

Free text change information supplied by the pharmaceutical company

None provided