PHYSIONEAL 35 Glucose 1.36% w/v / 13.6 mg/ml Clear-Flex, Solution for peritoneal dialysis
- Name:
PHYSIONEAL 35 Glucose 1.36% w/v / 13.6 mg/ml Clear-Flex, Solution for peritoneal dialysis
- Company:
Baxter Holding B.V.
- Active Ingredients:
Calcium Chloride Dihydrate, Glucose Monohydrate, Magnesium chloride, hexahydrate, Sodium Chloride, Sodium Hydrogen Carbonate, Sodium Lactate
- Legal Category:
Product subject to medical prescription which may not be renewed (A)
Click on this link to Download PDF directly
Baxter Holding B.V.
Company Products
When a pharmaceutical company changes any document, a new version is published on medicines.ie. For each version, we show the dates it was published on medicines.ie and the reasons for change.
Updated on 2 April 2019 SmPC
Reasons for updating
- Change to section 7 - Marketing authorisation holder
- Change to section 8 - Marketing authorisation number(s)
- Change to section 10 - Date of revision of the text
Legal category: Product subject to medical prescription which may not be renewed (A)
Updated on 23 July 2018 SmPC
Reasons for updating
- Change to section 6.5 - Nature and contents of container
- Change to section 10 - Date of revision of the text
Legal category: Product subject to medical prescription which may not be renewed (A)
Updated on 22 February 2017 PIL
Reasons for updating
- Change to section 6.2 - Incompatibilities
- Change to section 6.3 - Shelf life
- Change to section 6.4 - Special precautions for storage
- Change to section 6.6 - Special precautions for disposal and other handling
- Change to section 10 - Date of revision of the text
Free text change information supplied by the pharmaceutical company
Updates made in sections 6.2,6.3, 6.4 and 6.6 in line with a revised Company Core Data Sheet
6.2 - text added - Aminoglycosides (eg. netilmycin, gentamycin, tobramycin) should not be mixed with penicillins due to chemical incompatibility.
6.3 text added "After opening / dilution:
Chemical and physical in-use stability has been demonstrated for 24 hours at 25°C for: cefazolin (750 mg/l), heparin (2500 IU/L), low molecular weight heparin (Innohep 2500 IU/L), netilmycin (60 mg/l) and vancomycin (1000 mg/l).
Chemical and physical in-use stability has been demonstrated for 6 hours at 25°C for insulin (Actrapid 4 IU/L, 10 IU/L, 20 IU/L and 40 IU/L).
Gentamicin (60 mg/l) and tobramycin (60 mg/l) can be added if the solution is used immediately after drug addition.
From a microbiological point of view, the product should be used immediately. If not used immediately, in-use storage times and conditions prior to use are the responsibility of the user and would normally not be longer than 24 hours, unless reconstitution / dilution (etc) has taken place in controlled and validated aseptic conditions
6.4 Text added - For storage conditions of the reconstituted medicinal product, see section 6.3.
6.6 Text added - In the case of damage, the container should be discarded.
Updated on 22 February 2017 SmPC
Reasons for updating
- Change to section 6.2 - Incompatibilities
- Change to section 6.3 - Shelf life
- Change to section 6.4 - Special precautions for storage
- Change to section 6.6 - Special precautions for disposal and other handling
- Change to section 10 - Date of revision of the text
Legal category: Product subject to medical prescription which may not be renewed (A)
Free text change information supplied by the pharmaceutical company
Updates made in sections 6.2,6.3, 6.4 and 6.6 in line with a revised Company Core Data Sheet
6.2 - text added - Aminoglycosides (eg. netilmycin, gentamycin, tobramycin) should not be mixed with penicillins due to chemical incompatibility.
6.3 text added "After opening / dilution:
Chemical and physical in-use stability has been demonstrated for 24 hours at 25°C for: cefazolin (750 mg/l), heparin (2500 IU/L), low molecular weight heparin (Innohep 2500 IU/L), netilmycin (60 mg/l) and vancomycin (1000 mg/l).
Chemical and physical in-use stability has been demonstrated for 6 hours at 25°C for insulin (Actrapid 4 IU/L, 10 IU/L, 20 IU/L and 40 IU/L).
Gentamicin (60 mg/l) and tobramycin (60 mg/l) can be added if the solution is used immediately after drug addition.
From a microbiological point of view, the product should be used immediately. If not used immediately, in-use storage times and conditions prior to use are the responsibility of the user and would normally not be longer than 24 hours, unless reconstitution / dilution (etc) has taken place in controlled and validated aseptic conditions
6.4 Text added - For storage conditions of the reconstituted medicinal product, see section 6.3.
6.6 Text added - In the case of damage, the container should be discarded.
Updated on 22 February 2017 SmPC
Reasons for updating
- New SmPC for new product
Legal category: Product subject to medical prescription which may not be renewed (A)
Updated on 1 September 2016 PIL
Reasons for updating
- New SPC for medicines.ie
Free text change information supplied by the pharmaceutical company
Updated on 1 September 2016 SmPC
Reasons for updating
- New SPC for medicines.ie
Legal category: Product subject to medical prescription which may not be renewed (A)