PHYSIONEAL 40 Glucose 2.27% w/v / 22.7 mg/ml Clear-Flex, Solution for peritoneal dialysis
- Name:
PHYSIONEAL 40 Glucose 2.27% w/v / 22.7 mg/ml Clear-Flex, Solution for peritoneal dialysis
- Company:
Baxter Holding B.V.
- Active Ingredients:
Calcium Chloride Dihydrate, Glucose Monohydrate, Magnesium chloride, hexahydrate, Sodium Chloride, Sodium Hydrogen Carbonate, Sodium Lactate
- Legal Category:
Product subject to medical prescription which may not be renewed (A)
Click on this link to Download PDF directly
Baxter Holding B.V.
Company Products
When a pharmaceutical company changes any document, a new version is published on medicines.ie. For each version, we show the dates it was published on medicines.ie and the reasons for change.
Updated on 2 April 2019 SPC
Reasons for updating
- Change to section 7 - Marketing authorisation holder
- Change to section 8 - Marketing authorisation number(s)
- Change to section 10 - Date of revision of the text
Legal category: Product subject to medical prescription which may not be renewed (A)
Updated on 23 July 2018 SPC
Reasons for updating
- Change to section 6.5 - Nature and contents of container
- Change to section 10 - Date of revision of the text
Legal category: Product subject to medical prescription which may not be renewed (A)
Updated on 22 February 2017 PIL
Reasons for updating
- Change to section 6.2 - Incompatibilities
- Change to section 6.3 - Shelf life
- Change to section 6.4 - Special precautions for storage
- Change to section 6.6 - Special precautions for disposal and other handling
- Change to section 10 - Date of revision of the text
Free text change information supplied by the pharmaceutical company
6.2 - text added - Aminoglycosides (eg. netilmycin, gentamycin, tobramycin) should not be mixed with penicillins due to chemical incompatibility.
6.3 text added "After opening / dilution:
Chemical and physical in-use stability has been demonstrated for 24 hours at 25°C for: cefazolin (750 mg/l), heparin (2500 IU/L), low molecular weight heparin (Innohep 2500 IU/L), netilmycin (60 mg/l) and vancomycin (1000 mg/l).
Chemical and physical in-use stability has been demonstrated for 6 hours at 25°C for insulin (Actrapid 4 IU/L, 10 IU/L, 20 IU/L and 40 IU/L).
Gentamicin (60 mg/l) and tobramycin (60 mg/l) can be added if the solution is used immediately after drug addition.
From a microbiological point of view, the product should be used immediately. If not used immediately, in-use storage times and conditions prior to use are the responsibility of the user and would normally not be longer than 24 hours, unless reconstitution / dilution (etc) has taken place in controlled and validated aseptic conditions
6.4 Text added - For storage conditions of the reconstituted medicinal product, see section 6.3.
6.6 Text added - In the case of damage, the container should be discarded.
Updated on 22 February 2017 SPC
Reasons for updating
- Change to section 6.2 - Incompatibilities
- Change to section 6.3 - Shelf life
- Change to section 6.4 - Special precautions for storage
- Change to section 6.6 - Special precautions for disposal and other handling
- Change to section 10 - Date of revision of the text
Legal category: Product subject to medical prescription which may not be renewed (A)
Free text change information supplied by the pharmaceutical company
6.2 - text added - Aminoglycosides (eg. netilmycin, gentamycin, tobramycin) should not be mixed with penicillins due to chemical incompatibility.
6.3 text added "After opening / dilution:
Chemical and physical in-use stability has been demonstrated for 24 hours at 25°C for: cefazolin (750 mg/l), heparin (2500 IU/L), low molecular weight heparin (Innohep 2500 IU/L), netilmycin (60 mg/l) and vancomycin (1000 mg/l).
Chemical and physical in-use stability has been demonstrated for 6 hours at 25°C for insulin (Actrapid 4 IU/L, 10 IU/L, 20 IU/L and 40 IU/L).
Gentamicin (60 mg/l) and tobramycin (60 mg/l) can be added if the solution is used immediately after drug addition.
From a microbiological point of view, the product should be used immediately. If not used immediately, in-use storage times and conditions prior to use are the responsibility of the user and would normally not be longer than 24 hours, unless reconstitution / dilution (etc) has taken place in controlled and validated aseptic conditions
6.4 Text added - For storage conditions of the reconstituted medicinal product, see section 6.3.
6.6 Text added - In the case of damage, the container should be discarded.
Updated on 22 February 2017 SPC
Reasons for updating
- New SPC for new product
Legal category: Product subject to medical prescription which may not be renewed (A)
Updated on 1 September 2016 PIL
Reasons for updating
- New SPC for medicines.ie
Free text change information supplied by the pharmaceutical company
Updated on 1 September 2016 SPC
Reasons for updating
- New SPC for medicines.ie
Legal category: Product subject to medical prescription which may not be renewed (A)